What are the best microphones for iPhone with flash?
Since the introduction of the iPhone 11 Pro, Apple has been interested in developing its movie skills. If you want to use the latest Apple smartphones for filming, consider buying a microphone that plugs into a zippered port. Apple eliminated the iPhone 7’s 3.5 mm mic jack, and since then the iPhone only has a zippered jack to connect the microphones.
Luckily, there are already some on the market that work with the iPhone’s flash connector and you need excellent sound quality for your movies. For example, only a few of the microphones that will work with the iPhone’s flash connector have been considered.
This content uses reference links. More information can be found in my ethical guide.
Me-Lvideo microphone jack
The Red VideoMic Me-L is similar to the Red VideoMic Me, but instead of a 3.5 mm plug you get a flash plug. This means you can use it with any iPhone, including the iPhone 11 Pro, XS, X, 8 and 7. You can install the Red Video Mic Me-L in any direction on your iPhone, making it ideal if you want to talk to a camera for video blogs. Just like its predecessor, it has a 3.5 mm headphone jack, so you can follow the sound during the recording. That’s fine if you want to listen to specific sound problems.
The microphone uses a cardioid polar pattern. He only picks up the sound right in front of him and ignores side and background noise. The microphone is powered by the iPhone itself, so no extra batteries are needed to power it. A handy windbag is also included if you need extra help when shooting in bad weather.
The price: $75.00 £70.00 €68.00
iRig video microphone
iRig Video is a directional microphone with a short loop, ideal for mobile reporting and interviews. It is also compatible with many devices and works with your DSLR camera as well as your iPhone, iPad or Android smartphone.
The microphone is equipped with a supercardioid sensor that suppresses all background noise outside the sound range. This makes it ideal for noisy environments where you only want to hear the person in front of you. It is equipped with 24-bit 96 kHz converters that provide a clear, clear signal for your audio recordings. It also comes with a TRS cable and a hot shoe mount for use with an SLR camera.
The price: $129.00 £105.00 €117.00
The Boya BY-DM200 is a cardioid capacitor stereo microphone similar to the Red VideoMic Me-L. It fits perfectly into your iPhone’s light port for clear sound on the go.
It comes with a foam wind jacket for medium weather conditions and a fake fur wind jacket for bad weather conditions with extreme wind. So it gives you great protection when filming the place. It has a frequency response from 25 Hz to 20 Hz and a signal-to-noise ratio of 80 dB. If you’re looking for a cheaper alternative to Red VideoMic Me-L, this may be a good choice.
The price: $40.00 £32.00 €36.00
The Saramonic SmartMic+ Di is a compact directional microphone that perfectly captures sounds in front of the microphone. This means it ignores side and background sounds, which means you only get the sounds you want, not the sounds you don’t want. It’s similar to the Boya BY-DM200 and the Red VideoMic Me-L, so if you’re familiar with these microphones, you know what to expect.
Just plug it into the flash port on your iPhone and go. It’s powered by the iPhone, so you don’t have to worry about annoying batteries to make it work. There is a 3.5 mm headphone jack on the back of the microphone. So if you want to listen to the sound while recording, you can add your favourite headphones if you like. It has a frequency response from 75 Hz to 20 kHz, which should provide clear and vivid audio recording. It also includes a foam windshield for the interior and a solid fur windshield for extreme weather conditions.
The price: $75.00 £61.00 €68.00
If the Sennheiser ClipMic Digital falls slightly outside your price range, you may want to consider the Boya BY-DM1. This external microphone provides clear, high-quality recording sound and connects directly to your iPhone’s light port. No large adapters needed. It’s about a quarter of the price of the Sennheiser ClipMic Digital, so it’s a real bargain; but don’t expect the same sound quality. If you know the Laval Boya BY-M1 microphone, you know exactly what this microphone can do.
It offers a resolution up to 24 bits / 48 kHz with a frequency response from 20 Hz to 20 kHz. It’s an omnidirectional microphone, which means it records sound everywhere. This makes it an excellent tool for conducting interviews and making documentaries. It has a sensitivity of -42+/-3DB and works with the iPhone. It also has a generous 6 meter long cable, which should be enough to keep you far enough away from your furniture. If you’re looking for a cheap flash port microphone, you won’t get far with it.
The price: $70.00 £57.00 €63.00
The Saramonic LavMicro Di is another large lavalier microphone, ideal for video interviews with smartphones. It enables stereo recording on any iOS device equipped with a flash connector. It’s an omnidirectional microphone, which means it records sound everywhere.
It has a frequency response of 30 – 20000 Hz and records at a resolution of 24 bits 48 Hz. It also has a sensitivity of -42+/-3DB. It’s powered by the iPhone, so it doesn’t need to be powered by external batteries. If you don’t like Boya’s or Sennheiser’s microphone clamps, this is a good choice.
The price: $99.00 £80.00 €89.00
Personnel SC6-L Mobile Research Unit
The Red SC6-L Mobile Interview Kit allows you to connect two microphones with clips to your iPhone at the same time. It contains two professional red smartLav+ microphones, both equipped with omnidirectional capacitor capsules that capture sound from all sides. These microphones have 3.5 mm TRRS connectors and do not have flash plugs for the iPhone. However, this should not be a problem as both microphones are connected to the supplied SC6-L flash adapter.
The SC6-L is an input/output unit connected to the flash terminal of the iPhone. It has two 3.5 mm microphone jacks for smartLav+ and a headphone jack for listening to audio while recording. As soon as the lapel microphones are connected to the SC6-L, two objects can be recorded simultaneously. That’s fine if you want to have the interviewer and interview him in front of the camera at the same time.
The price: $78.00 £63.00 €70.00
iRig Pro is an XLR/1/4 combination adapter that allows you to connect any XLR microphone to an iPhone flash socket. It is compact and comes with two connections. One adapter works with the flash connector on your iPhone, while the other allows you to connect it to a USB port on your computer.
On the front panel there is a manual gain control, which allows you to adjust the gain. It also has a built-in preamplifier to reduce sound and increase gain. The high-quality A/D converter built into the iRig Pro converts analogue audio into a lightweight port and records up to 24-bit, 96 kHz. The microphones you connect to it must not lose sound quality. It also has built-in phantom power, which can be used to power XLR microphones that need it.
The price: $130.00 £105.00 €117.00
The Saramonic SmartRig Di is an iRig Pro audio adapter. This allows you to connect any XLR microphone to the flash socket on your iPhone. You can also connect a musical instrument, such as a guitar, to the ¼ jack if you want to record a music session. You control the gain with the flywheel so you can set accurate levels for your recordings.
SmartRig Di has a frequency response between 20 Hz and 20 kHz and a signal-to-noise ratio of 80 dB at 1 kHz, input -30dBu. SmartRig Di is powered by a 9-volt battery, which also powers any microphone with +48 phantom power if needed. You can also turn the phantom power on and off if necessary. If you want to listen to audio while recording, you can connect your favourite headphones to the supplied 3.5 mm headphone jack.
The price: $60.00 £48.00 €54.00
iRig Pro Duo
IK Multimedia iRig Pro Duo is a version of iRig Pro with two SLR cameras. Allows you to add two XLR microphones to your iPhone via the zip connector. It has many advantages. One: If you interview both the interviewer and the respondent, both microphones are available. The smartphone operator can also have a more concise microphone for speech transmission, while the subject can use a handheld microphone.
iRig Pro has two separate gain controls, so you can set each microphone to the correct level. It also includes a powerful preamp and phantom power supply for the XLR microphones that need it. iRig Pro Duo runs on two AA batteries, so it doesn’t consume the power of your iPhone. If you take a risk, you can also connect it to the power supply. There is also a headphone jack for sound control, which has its own volume control. If you’re doing video work with a smartphone that requires two microphones, it’s worth investing in.
The price: $199.00 £160.00 €179.00
Saramonic SmartRig+ Di is the biggest challenge for SmartRig Di. It has two XLR inputs that allow you to connect two professional XLR microphones to your iPhone’s flash interface at the same time. These two inputs also have two ¼-inch jacks that allow you to connect two musical instruments to your iPhone. There are also two 3.5 mm microphone inputs if you want to connect microphones with a 3.5 mm plug.
SmartRig+ Di has a frequency response from 20 Hz to 20 kHz and a signal-to-noise ratio of 78 dB at 1 kHz, input -30dBu. You control the gain with both gain controls. This allows you to adjust the audio levels for each audio channel individually. Both XLR inputs have +48 phantom power, which can be activated for any microphone that needs it. If you need to listen to the sound during recording, you can connect headphones to the supplied 3.5 mm jack.
The price: $179.00 £145.00 €161.00
The Red i-XLR is an XLR adapter that you can connect to any XLR microphone, so you can connect it to your iPhone’s flash interface. The cable is about three meters long and should be long enough to get to the site if you connect an XLR handheld microphone to it. The Red i-XLR does not need a battery as it is powered by your iPhone. So there’s no risk of running out of battery power when your iPhone is empty.
The Red i-XLR is equipped with a level control to adjust the volume of the headphones, so you can lower the volume when your sound is a little too loud. It also has a zero delay, so there’s no delay in what you hear. What keeps him from doing this is the lack of preamplifiers. There is also no gain control or phantom power. If this data is not a problem, you can easily connect your favourite XLR microphone to your smartphone.
The price: $150.00 £121.00 €135.00
Microphone iRig HD 2
The iRig Mic HD 2 is the successor of the iRig Mic HD from IK Multimedia. Just like this microphone, it is a handheld condenser microphone that is very suitable for interviews, sound amplification or music recordings. It has a metal casing that makes it strong enough to support most audio recordings. A rotary knob for gain control is also included.
Integrated preamplifier for enhanced audio recording and amplification. It can record sound up to 24 bits at 96 kHz. He will not disappoint you in the quality of his recordings. It also has a cardioid pickup structure to repel unwanted noises around the microphone. There is a headphone jack so you can listen to your audio recording. It’s useful if you want to make sure you get the best sound for your video and useful for detecting any audio problems. If necessary, you can use this connection to connect another audio recorder. There is also a desk microphone stand if you want to work with voice-over.
The price: $99.00 £80.00 €89.00
The Saramonic SR-HM7 DI is a dynamic digital handheld microphone ideal for on-site interviews, podcasts and live audio recordings. It comes with a light cable to connect to your iPhone and a USB cable to connect to your PC or Mac. The supplied rubber cap holds the cable in place to prevent accidental removal. A 3.5 mm headphone jack is available if you want to connect headphones to hear the sound during recording.
The microphone has an elegant black finish that looks good on camera and minimizes light reflections. The long handle is easy to hold and provides enough space to attach microphone flags to promote your necklace or brand. The steel construction will also reduce the operating noise. The cardioid sensor eliminates unwanted side and rear noise and also has a built-in pre-amplifier for more gain and better sound quality.
The price: $199.00 £160.00 €179.00
Such popular positions:
What are the top 15 microphones for the production of smartphone films?
What are the best USB-C microphones for smartphones for film production?
What’s the best budget for making movies for the iPhone?
iPhone, iPad, movie accessories and applications